Beijing Silk Road Enterprise Management Services Co.,LTD
Beijing Silk Road Enterprise Management Services Co.,LTD
Add to Cart
16mm twin screw laboratory extruder for plastic compounding with bench type
Special laboratory:
This micro lab extruder is designed for medical university and R&D center
The output could be from 15-1000g/hr, barrel length could be from 16-48(L/D) to meet various applications of compounding and reaction.
| No. | Denomination of the delivery | Qty. |
| 1.0 | Raw materials dealing units | |
| 1.1 | Main feeder | 1set |
| Motor power:0.2kw, Siemens motor Feeding mode: by single screw, Material contact parts are made of 304 stainless steel With horizontal agitator inside the hopper to avoid material bridging Volume:10L, S.S made Capacity: Max-20kg/hr Siemens inverter | ||
| 2.0 | CHT16 granulating unit | |
| 2.1 | CHT20A twin screw extruder | 1set |
| Main motor: Siemens motor, 1.5kw； Safety degree: IP56 Siemens inverter
Power transmission: Safety clutch torque limiter made by COWIN EXTRUSION
Gearbox: High safety factor design; Latest steel alloy material for gears applied with special heat treatment and manufactured at high precision level; NSK bearings and imported seals applied, Special lubricating system equipped combined with immersing and forcing solutions; Input/output rotary speed:1500/600rpm；
Extrusion line: Screw Diameter: 16mm,L/D:40:1； Center Distance: 12.5 Maximum Screw speed:600rpm； Screw configuration:with modular structure, torque transmission by spline; Screw material: 38CrMoAlA, HV950-1050 Barrel configuration: with modular structure, each one with length of 6L/D and feeding barrel is 4L/D,and the barrels connected together by bolts and pins; Barrel material: 38CrMoAlA ,HV950-1050,each section is connected by bolts
Temperature controlling: Heating system: Cartridge heater from HT, total heating power with approx.3kw (No.1 Section cooled by water)； Temp. controller:Siemens temperature module controller
Steel base: Welding base with special pads; | ||
| 3.0 | Strand pelletizing line | |
| 3.1 | Extrusion die plates | 1pcs |
| Material:40Cr,with nitrifying heat-treatment; The strand outgoing hole dia.: 4mm, 1 hole Stainless steel plate unit for protection equipped; | ||
| 3.2 | Water bath | 1set |
| 150mmX700mm, S.S bath With leading rollers Movable supporter | ||
| 3.3 | Air knife | |
| Motor power:0.55kw Two PU leading rollers Made of stainless steel. | ||
| 3.4 | Pelletizer | 1set |
| Max output: 10kg/hr No. of strands: 3 Standard pellet: 3x3mm Cutter dimension: 90x60mm,24 tooth Effective rotation speed:350-1000rpm Haul off speed:0-96m/min Motor power: 0.37kw Rotated cutter clearance: 0.08-0.12mm Leading roller: PU Frequency inverter: Siemens | ||
| 4.0 | Control cabinet | 1set |
| 4.1 | Cabinet for extrusion line | |
| Low-voltage electrics: Siemens Speed regulator: Siemens inverter； Temperature control panel: Siemens temperature module controller OMRON medium relay from Japan Power module is OMRON from Japan Interlock design The cabinet will be located under the base frame of the extruder | ||
| 4.2 | Siemens PLC and touch screen | 1set |
| Siemens S7-200 PLC Siemens TP900 touch screen Profibus DP communication |
Pictures:
